MR12 basic terminal board AKP + 5 plug-in modules
The outputs on the AKP (terminal board) are designed on plug-in modules and are available in the following variants:
– Relay (standard module with finder relay).
– PWM for controlling pumps with a PWM signal.
In this case, the 230V terminal on the AKP is permanently connected to 230V. The PWM signal is connected to the plug-in module.
– TRIAC module for controlling drives with very high
Switching frequency (primary valves).
– 0-10V for controlling pumps with 0-10V signal. In this case, the 230V terminal on the AKP is permanently connected to 230V. The 0-10V signal is connected to the plug-in module.
Scope of delivery: AKP board with connection cable (500mm) and 5 plug-in modules (3x STM relays STD + 2x STM TRIAC).
Dimensions: (HxWxD) 100x45x36
Downloads & LinksDatenblattAnklemmplan