Service adapter USB for all controller versions
SCHNEID service adapter USB for communication with all SCHNEID module controllers.
The SCHNEID service adapter USB is used for quick parameterization of the control device.
The adapter is plugged directly into the COM port of the controller (if a COM base is available, the ribbon cable must be disconnected beforehand)
The adapter is suitable for all control devices with a 10 or 14-pin COM connection.
The parameter tool can be obtained on the homepage www.schneid.at under ´´Download´´.
Scope of delivery: SCHNEID service adapter USB for communication with all SCHNEID module controllers with COM connection; Includes micro USB cable.
Dimensions: (HxWxD) 40x34x24mm